• Eventide BD600W Broadcast Delay

BD600W+


The New Standard for Protection on WheatNet-IP systems

The BD600W+ offers an unprecedented 80 seconds of the highest quality revenue and license-protecting delay - twice as much as other delays. You have the flexibility to customize the delay buffer length from four seconds to the full 80 seconds. Dump can be customized in 1/2 second increments up to 10 seconds. Each time the DUMP button is pressed, only one segment is deleted. For example, if a unit is set to the full 80 seconds of delay buffer, and is set up to provide 8-second dumps, you will have ten separate dump segments. Pushing the DUMP button the first time cuts out one 8-second segment. You still have 72 seconds of delay protection. If this is followed by more trash-talk, push the DUMP button again and you still have over a minute of delay protection.


The "sneeze" button momentarily "edits" audio entering the delay, allowing the host to sneeze, cough, or make a short comment without being heard on air - and without dead air. Your station cannot afford to work without a net. With the BD600W+, you will never worry about running out of delay memory.


In addition to the fully integrated BD600W+, an optional factory installed upgrade, or a W-Upgrade field upgrade kit (soldering required) is available from Eventide for BD600s manufactured in 2011 or later.  


SPECIFICATIONS

Input / Output

Analog Input


Analog Output

Audio Input Connectors

XLR pin 2 hot, true differential balanced, +4 dBm nominal

Audio Output Connectors

XLR pin 2 hot, true differential balanced, +4 dBm nominal

Input Impedance

20K ohms bridging

Output Impedance

20K ohms bridging

Full Scale Input Level

+26dBu

Fuil Scale Output Level

+65dBu

Dynamic Range

>104dB

Dynamic Range

>108dB

THD+N

<0.003 @ 1kHz, -3dBFS

THD+N

<0.003 @ 1kHz, -3dBFS in stable delay state

Crosstalk

<-100dB @ 20Hz to 20kHz, -1dBFS

Crosstalk

<-100dB @ 20Hz to 20kHz, 1dBFS

 

 

SNR

>108dB

Signal & Connectors

Recorded Signal  Specs


Remote Control Connectors and Interfaces

Frequency Response

Live or Bypass: 20Hz-20kHz +- 0.1dB


HD Microprecision Delay mode 10Hz-19kHz +- 0.25dB


Broadcast Profanity Delay mode 10hZ-20kHz +- 0.1dB (while delay is chaning 10Hz-19kHz +- 1.5dB)


Remote Control Inputs

RS-232 control input and output


USB Remote control


Profanity Delay Maximum Length

Can be set to 4, 6, 8, 12, 16, 20, 30, 40, 60, or 80 seconds

Basic Remote

4 configurable inputs (closure to ground)


2 relay-isolated status outputs


Micro Precision Fixed Delay

Can be set from .010 seconds to 9.999,999 seconds in microsecond steps

Optional Extended Remote

16 bi-polar opto-isolated inputs


16 open-collector outputs


RS-232 input and delayed output


 

 

Compact Flash Interface

Supports Type I and Type II Compact Flash cards for .WAV sample playback and software update

 


Signal Characteristics

A/D and Digital Signal Characteristics


Sample Rates

48kHz, 44.1kHz, Word Clock, AES/EBU

Digital Inputs/Outputs

2 Channels of 24-bit AES/EBU

 


Physical

Physical


Dimensions

Inches: 1.75h x 19w x 10.5d


CM: 4.5h x 48.3w x 26.7d


Weight

9 pounds (4.1 Kg); Shipping weight 14 pounds (6.5 Kg)

Power

Write a review

Note: HTML is not translated!
    Bad           Good

Eventide BD600W Broadcast Delay

  • Brand: Eventide
  • Product Code: Eventide BD600W Broadcast Delay
  • Availability: In Stock
  • $3,995.00
  • $3,795.00

  • Ex Tax: $3,795.00

Tags: Eventide BD600W Broadcast Delay